What is black mass?
Updated
Black mass is the dark powder left after used lithium-ion batteries and battery factory scrap are discharged, shredded and sorted. It holds most of a battery's valuable materials (lithium, nickel, cobalt and manganese from the cathode, and graphite from the anode), and it is the main traded product between collecting batteries and refining them back into battery chemicals.
How black mass is made
Batteries are first discharged, then shredded, often under an inert gas or in a liquid to control fire risk. The shredded material is screened and separated by size, magnetism and density. Steel casings, plastics, and most of the copper and aluminum foil are taken out and sold as scrap. Some plants heat the material to burn off the electrolyte and the binder that holds the electrode coatings together. What is left is the fine black powder that gives black mass its name.
Making black mass is the mechanical step. Turning it back into battery-grade nickel sulfate, cobalt sulfate or lithium carbonate is the chemical step, and it is often done by a different company, in a different country.
What is in it
The grade, or metal content, depends on two things: the battery chemistry, and how much of the powder is cathode material rather than graphite, copper, aluminum and binder. Black mass from production scrap is richer than black mass from end-of-life batteries, because electrode offcuts have less casing and foil to remove.
| Chemistry | Source | Li | Ni | Co | Mn | Graphite |
|---|---|---|---|---|---|---|
| NMC811 | End-of-life batteries | 3.9% | 26.5% | 3.3% | 3.1% | 39% |
| NMC811 | Production scrap | 6.1% | 41.0% | 5.2% | 4.8% | 12% |
| NMC622 | End-of-life batteries | 3.9% | 20.0% | 6.7% | 6.2% | 37% |
| NMC622 | Production scrap | 6.1% | 30.9% | 10.3% | 9.6% | 12% |
| NCA | End-of-life batteries | 4.0% | 26.9% | 5.1% | – | 38% |
| NCA | Production scrap | 6.1% | 41.5% | 7.8% | – | 12% |
| LCO | End-of-life batteries | 3.9% | – | 33.1% | – | 26% |
| LCO | Production scrap | 6.0% | – | 51.2% | – | 12% |
| LFP | End-of-life batteries | 2.4% | – | – | – | 32% |
| LFP | Production scrap | 3.7% | – | – | – | 12% |
Grades are each cathode's metal content by stoichiometry times its share of the black mass: 55% for end-of-life batteries, in line with Fastmarkets' 3–4.5% lithium specification for NMC black mass, and 85% for production scrap, in line with China's GB/T 45203-2024 grade 1. Graphite shares are from Argonne's EverBatt model. Real lots vary; assays decide the price.
Most black mass traded today comes from production scrap, not end-of-life electric vehicle packs. Industry estimates put scrap at roughly two-thirds of available feedstock through 2030, with retired EV packs not dominating until after 2040 (Resource Recycling, Apr 2026).
How black mass is priced
There are three common ways to price it:
- Payables, for nickel and cobalt chemistries (NMC, NCA, LCO). The buyer pays a percentage of the value of the metal in the black mass at a reference price, for example 82% of the nickel and cobalt value at the LME nickel and cobalt metal prices. See black mass payables, explained.
- Price per percentage point of lithium, for LFP, LMFP and LMO, which have no nickel or cobalt. A lot at 2.4% lithium is paid 2.4 times the price per point. See LFP black mass price.
- A flat price per tonne, common in spot deals. It can even be negative: a gate fee paid to the recycler to take low-value or hazardous material.
Contracts also charge for impurities such as copper, aluminum, iron and fluorine above an agreed allowance, because they raise refining costs.
What happens to it next
- Hydrometallurgical refining (most common): leach the powder in acid and recover nickel, cobalt and manganese compounds and lithium carbonate. Graphite can be recovered.
- Pyrometallurgical refining: smelt it. Nickel, cobalt and copper report to an alloy that is refined further; lithium and manganese mostly end up in slag, and graphite burns as a reductant. Often used for mixed or lower-grade feed, sometimes followed by hydrometallurgy to recover lithium from the slag.
- Direct recycling: separate the cathode material and restore its lithium, selling cathode powder instead of metal salts. It promises higher value but is still at pilot or early commercial scale and needs clean, single-chemistry feed.
The calculator compares all three using Argonne's EverBatt process defaults: hydro, pyro and direct, for NMC811 black mass.
Who buys it, and where it can go
Refiners in China, South Korea, Europe and North America compete for black mass, and where it can be shipped is increasingly regulated. Since August 27, 2026, US recyclers must sell all of their black mass to US buyers unless granted an exception, and Europe is tightening its hazardous-waste shipment rules (Benchmark, Q3 2026 black mass price review). Rules like these change who can bid for a lot, and so the price it gets.
Try it
The black mass calculator takes a chemistry, a feedstock source and a pricing deal, and estimates the refiner's margin per tonne at current metal prices, what drives it, and the lithium price at which it breaks even. For what it shows at today's prices, read Is battery recycling profitable?